Tuesday, February 22, 2022

Materials solutions for DC fast chargers


Sponsored by Henkel

Gearing Up for the EV Road Ahead: Reliable, Convenient Fast Charging Will Drive the Future of EV Adoption

For consumers in developed nations, lifestyle convenience is ingrained. We don’t know what it’s like not to have access to necessities – food, water, clothing, housing and transportation – not to mention luxuries. When it comes to dependency on automotive transportation that, too, is built on confidence around readily-available fuel. In urban areas, there’s a gas station on every corner. The societal transformation that has occurred because of automotive technology is stunning; and, now, the auto sector is set to enter a new era of e-mobility. While electric vehicles (EVs) have been available for decades, next-generation electronic innovation and rechargeable battery technology have moved the needle from EVs as a novelty mode of transport to a reliable combustion engine alternative.

With a healthy nearly 30% compound annual growth rate (CAGR) projected over the next decade, there could be over 30 million EVs on the road globally by the year 2030(1). Consumer sentiment around battery-operated EVs has witnessed a dramatic shift in recent years, and EV sales as a percentage of total car sales have continued to steadily climb. While this is a promising development toward meeting the goals of CO2 emission reduction, a looming roadblock remains: access to charging power.

How do we keep the momentum from stalling out?

The EV charging infrastructure, while markedly improved with the expansion of EV ownership, is a long way from parity with the availability and speed of a refuel at the pump. Opportunity charging via residential or commercial (workplace and public spaces) connection comprises the vast majority of battery charging events and is the most practical for numerous reasons. An overnight plug-in at home will fully charge most EV batteries and a top-off while at work or the grocery store can help keep enough power for around town movement. But a few hours’ AC charge will not suffice for long distances like vacation travel. For extended journeys, access to robust fast charging stations that can provide a charge in 30 minutes or less is required.

Without an expansive DC fast charging infrastructure to supplement residential and public/workplace access, the projected dramatic rise of EV sales through 2030 may sputter. Numerous factors will influence accelerated development of the global charging network – from public policy to funding initiatives to technology innovation. No matter the charging level device, however, consumers expect reliability and dependability – just like the gas pump. The systems have to work and building them to last will increase trust and encourage more widespread use. Imagine pulling into a charging port to find the connector gun broken or the entire unit out of service; too many experiences like this and the enthusiasm about EV ownership may wane. For our part, Henkel is working to ensure dependability within all types of EV charging devices to shape consumer confidence at the port, just like exists at the pump. Effectively dissipating heat – all the way up to the 400 – 1000 V of fast chargers – is a key piece of the reliability equation, as are protective potting solutions for securing critical wires and coils, and gasketing materials that prevent ingress of environmental contaminants into charging units.

DC fast chargers, which is arguably where expansion is required, system reliability is a must as these units are expected to last as long as 10 years in the field. They are costly to produce and, therefore, performance and durability are critical. Functionality of the device’s workhorse power module – now smaller in size with higher power densities than previous-generation designs – can be optimized by effectively dissipating operational heat; Henkel’s low thermal resistance phase change thermal interface materials are a proven solution and a superior alternative to grease, which can lose effectiveness over time. The importance of sound thermal control cannot be overstated, especially with systems that are managing such high power. Securing the unit’s interior structure to protect its electronics is made possible with UL-certified Sonderhoff Fermapor K31 formed-in-place foam gasketing (FIPFG) system, which allows high automation, fast deposition for complex shapes and changing designs. Units are protected from dust, moisture and other environmental contaminants while delivering fast shape recovery for confident serviceability. And, as drivers will attest, charging connectors take a beating with users plugging and unplugging quickly. High-performance, cost-effective potting materials fully encapsulate the cables and wires within the charging gun connectors to provide rugged durability in changing outdoor environments and manage the stress induced during user plug-ins.

While these are only a few examples of Henkel material solutions in the EV charging infrastructure ecosystem, they are integral to building long-lasting, functionally and electrically sound devices that will foster EV owner trust and drive needed additional investment.

Sponsored by Henkel

from Charged EVs https://ift.tt/yRqfldu

No comments:

Post a Comment

The advantages of using electric-PTOs in vehicles with or without an ICE engine: Watch Now

Sponsored by Parker. Commercial work trucks have historically utilized mechanical Power Take Off units (PTOs) to transfer power from the d...